CAD CONSULTANTS
Some tasks undertaken involving Computer Aided Design :
Draughting and design
2 and 3 dimensional drawings
Technical Illustration
CAD Customisation and System Development
Typical CAD projects undertaken include the following :
Client : ABS Pumps
Title : Sandhurst Sewage Treatment Works
Description of service : Examine site and prepare design and drawings for thrust restraint and
support of pipework and valves.
Client : National Grid Co plc
Title : Sellindge - Site survey and update layout plans
Description of service : Site survey of electricity distribution substation. Updating of
drawings showing buried assets across the site and
surrounding area.
Client : Ashact Ltd
Title : G.B.Papers
Description of service : Design and draughting of electrical works for waste water treatment plant
Client : London Electricity
Title : CAD Consultants
Description of service : Engaged as CAD Consultants for the development of systems to enable fully vectorised digital
mapping to replace traditional ink/film drawing office.
Development of Quality Assurance proceses and data
specifications to ensure quality throughout digital map
production. Pilot project - proving trials based on 8 maps in
New Malden. Production of digital map records compiled
from disparate source material covering an area of
approximately 100km sq. of inner London. 708 map records
produced based on 1:500, 1:250, 1:100 scales, all major
substation areas covered. Provision of trained personnel
on site. Autodesk developers
Client : Highlands Heath
Title : Electrical refurbishment
Description of service : Design, draught, specify and supervise the installation of new mains
distribution, lighting and alarm systems to three residential blocks of flats
Client : National Grid
Title : Land Boundaries
Description of service : Source record analysis and compilation of data to create a
data set showing property boundaries owned by National Grid.
Preparation of paper maps for presentation purposes
Client : The Institute of Cancer Research
Title : Building layout survey
Description of service : Engaged as CAD Consultants to survey and draw laboratory building layouts
Client : Scott Wilson Kirkpatrick
Title : King George V Lockgates
Description of service : Design and drawings for new flood defence gates.
Client : Southern Water
Title : Asset management surveys
Description of service : Site survey and condition grading of 40 water and waste
water treatment works. Preparation of reports, drawings and
calculations in support of the K factor.
Client : Midlands Electricity
Title : Document conversion
Description of service : Production of 339 digital map records based on 1:2500
scale covering an area of approximately 675km sq. of the
MEB area.
Client : RNLI (Royal National Lifeboat Institution)
Title : Workington
Description of service : Design and draughting of lifeboat launching and lifting crane, overseeing
manufacture, installation and trials. Design and draughting of building
services for boathouse
Client : Royal Borough of Kensington & Chelsea
Title : Parking Signs
Description of service : Survey and condition grade assessment of approximately
12000 parking restriction signs across the borough.
Digitising and geo-referencing survey data for use with
GGP GIS
Client : National Grid
Title : CAD Consultants - Pilot project and proving trials based on Sheffield ring main.
Description of service : Engaged as CAD Consultants for the development of digital mapping systems and create full
data sets for all assets associated with AC power cables
countrywide. Digitisation of paper based records detailing
AC power cables throughout England and Wales.Autodesk developers
Client : Roxby Engineering
Title : CAD Consultants
Description of service : Provision of trained CAD staff to cover staff holidays
Client : Seeboard
Title : GIS Consultancy & Data Conversion Pilot Project
Description of service : System development for Smallworld GIS to achieve rapid
and efficient data input to asset management database.
Pilot project to prove systems including data capture of
paper based records and the creation of a fully connected
network data model showing overhead and buried
electricity supply network cables and associated jointing
details. Quality assurance systems developed for the tasks.Autodesk developers
Client : Bullens Consultants
Title : EA Anglian Region, Sandford Mill Sluices.
Description of service : Design and drawing of new canal level control machinery
Client : London Docklands Development Corporation
Title : CAD Consultants - Land use plans
Description of service : Provision of trained CAD personnel. Digitisation of land
boundary and ownership details.
Client : Hackney Estate Management & Dev.
Title : Land Use Survey of Kingsland Housing Neighbourhood for use with GIS
Description of service : Survey of land use in the Kingsland Housing
Neighbourhood. Survey of tree locations, height and width.
Provision of digital data for use with MapInfo GIS.
Client : Southend on Sea Boro. Council
Title : CAD Consultants - Autocad based GIS System for the Planning Department
Description of service : Engaged as CAD Consultants for the bespoke system development providing a data
management system for the planning application
department. Data conversion of 52 planning index boards
with approximately 40000 planning applications. Digitisation
of 40 different areas of constraint. Digitisation of the Local
Plan. Autodesk developers
Client : General Mosaics Ltd
Title : Plotting of drawings for Canary Wharf project
Description of service : Plotting of CAD drawings showing tile layouts for
refurbishment of Canary Wharf
Client : Midlands Electricity
Title : Maintenance and updating of electricity cable network records
Description of service : Maintenance and updating of electricity supply network
data model relating to EHV, HV, LV and services.
Incorporation of changes based on job card records and
site sketches. Records maintained using Microstation and IRAS
Client : RKL-Arup
Title : Coleshill WWTW
Description of service : Preparation of civil engineering and detailed mechanical
and electrical drawings for Coleshill waster water
treatment works.
Client : London Underground Limited
Title : Workshop Procedures (Level 3 Documentation)
Description of service : Site audit of workshop procedures and preparation of
maintenance manuals for London Underground trackside
equipment refurbishment. Manuals include 2d and 3d
technical drawings and exploded views of equipment.
Client : Shaws Electrical Ltd
Title : Windsor Castle
Description of service : Design & drawing of building services for public house refurbishment
Client : A.W.Champion Ltd
Title : CAD Consultants - AutoCad Training
Description of service : One to one tuition as CAD Consultants teaching AutoCad LT basics for store layout and
sales planning drawings
Client : Aquila Networks (Midlands Electricity)
Title : Sub station circuit records
Description of service : Compilation of archive records and digitising of building
layouts and buried asset information to produce spatially
located site plans of electricity sub stations.
Client : Infraco Sub-Surface Ltd (London Underground)
Title : Draw Pits
Description of service : Service contract for the recording of cable draw pits.
Preparation of map records showing underground assets
plotted against Ordnance Survey mapping.
Client : Hawkins Russell Jones
Title : Cooker prototype
Description of service : Design and manufacture of a prototype cooker device. Preparation of 3d exploded views of components.
Client : National Grid
Title : Land Boundaries
Description of service : Digitisation of paper records showing land boundaries for
all National Grid sites in England and Wales. Preparation of
Gis database and paper based mapping for presentation
purposes.
Client : Total Environment
Title : Design of building services
Description of service : Design and drafting of mechanical and electrical building
services including lighting, heating, power, water, waste
water, lifts and air handling systems.
Client : ADR Associates
Title : Survey and preparation of building layout plans for new office layout
Description of service : Site survey and preparation of building layout plans on
CAD for new office layout. Liason with tenderers regaring
the drawings.
Client : Central Networks
Title : AIM Scheme Plans (Building Sites - Proposed Cabling Layout Drawings)
Description of service : Preparation of layout drawings and schematics for electric
and gas supply to new developments.
Client : Welsh Development Agency
Title : OS MasterMap Management
Description of service : To maintain a full dataset of Ordnance Survey MasterMap
GML data covering the area of Wales. To apply updates
and to supply extracts of specified areas in AutoCad
format on a call off basis. Autodesk developers
Client : Battle McCarthy
Title : Mobile Cinema
Description of service : Design and draughting of electrical & mechanical systems to create an
expanding cinema in the back of an articulated vehicle.
BHA Cromwell House, Engineering Consultants, Cromwell House,
78 Manor Road, Wallington, SM6 8RZ
t: 020 8647 1686, f: 020 8773 3110, e:
info@bhacromwell.co.uk
|